
TL;DR
- Hotline metrics become much more useful when they are put into context. Instead of looking for a single “right” number, compare results across time, locations, business units and other relevant parts of the organization.
- Look beyond report volume – substantiation, case closure time, reporting method, anonymity, issue type and investigation outcome metrics work together to draw attention to where additional focus is needed.
- Combine internal analysis with relevant external benchmarks. The goal isn’t simply to determine whether your numbers are higher or lower than somebody else’s – it’s to understand why they differ and what those differences may tell you about your program.
Your hotline is a wealth of data. Here’s how to make it useful.
Internal reporting systems produce an abundance of data. Compliance teams can track how many reports they receive, what employees report, where those concerns originate, how investigations proceed and how cases ultimately get resolved.
The harder (and more important) question is what to do with all those metrics.
Simply telling leadership the organization received a certain number of reports – or that a particular percentage concerned one risk category – doesn’t actually tell them whether the compliance program is working well or whether a problem is developing.
That’s because there is no universally “correct” number of reports. Each organization faces a different set of risks, has differing workforces and operates different reporting systems. Even organizations within the same industry can have significantly varying reporting patterns. Factors such as workforce composition, geography, organizational culture and how reporting channels are promoted all affect the numbers.
The objective is to give your data enough context to tell you something useful.
Step 1: Start by making sure your data is trustworthy
Before analyzing hotline data, examine the information going into your incident management system.
The familiar principle of “garbage in, garbage out” applies here. Inconsistent categorization, incomplete case records or delayed updates undermine even the most sophisticated analysis. Accurate and timely information – particularly around case outcomes and closure – creates a stronger foundation for understanding how the program is performing.
Establish consistent processes for recording important information throughout the lifecycle of a report. Depending on your program, that can include the issue category, location, business unit, reporting channel, whether the reporter was anonymous, investigation ownership, substantiation, remediation and case closure.
Consistency matters just as much as completeness. If two investigators categorize essentially identical issues differently, for example, an apparent trend might reflect inconsistent data entry rather than a real difference in organizational risk.
Before asking what your hotline data tells you, make sure you can trust the data you’re asking.
Step 2: Establish your organization’s own baseline
One of the most useful benchmarks is already inside your organization: historical trends.
Start by examining your organization’s reporting data over time. Rather than asking whether this month’s or year’s numbers are inherently “good” or “bad,” determine what is normal for your organization and look for meaningful deviations from that baseline.
Then begin breaking that baseline down.
Compare locations and business units. Interrogate issue category information. Examine reporting methods and compare investigation teams or departments where appropriate. Look at employee populations that are reporting – and those that aren’t.
Internal benchmarking reveals patterns that organization-wide averages obscure. Imagine that overall reporting volume has remained relatively stable. At first glance, there may appear to be little to investigate.
But suppose one business unit has experienced a significant increase in a particular type of allegation while comparable units haven’t. Or, what if reporting from one location dropped sharply while the rest of the organization remains steady.
Those are both signals worth investigating. The value isn’t necessarily in the number itself, it’s in the deviation from the norm.
Step 3: Analyze more than report volume
Report volume is an obvious metric, but it shouldn’t become shorthand for the health of a speak-up program.
A fuller analysis should include:
- Report volume and issue categories
- Reporting methods, such as phone, web or open-door reporting
- Anonymous versus named reports
- Substantiation rates
- Anonymous-report substantiation rates
- Case closure time
- Follow-up on anonymous reports
- Locations, employee groups or business units that are – or aren’t – reporting
- Investigation outcomes and remediation
- Retaliation cases and outcomes
- Results by investigating department or investigator
Don’t treat these metrics as isolated measurements, instead, look for relationships between them.
For example, an unusually low substantiation rate might prompt questions about whether employees understand what should be reported, whether reports contain enough information to investigate effectively or whether the investigation process itself needs examination. The important move is from “what is the number?” to “what could explain the number?”
That second question is where useful compliance analysis begins.
2026 Whistleblowing Statistics & Benchmarking
This NAVEX report shares whistleblowing statistics, key findings and recommendations from an analysis of the world's largest whistleblowing reporting database.

Step 4: Use case data to evaluate your investigation process
Hotline data can tell you about more than employee reporting behavior. It also tells you how effectively your organization responds after someone speaks up.
Case closure time is particularly useful to examine for this reason.
Employees who raise concerns and then see those concerns disappear into a lengthy process may conclude that the organization doesn’t take reporting seriously. Even if the case isn’t disappearing into the ether, the reporter may feel it is if they aren’t adequately communicated with.
Tracking resolution times can therefore help compliance teams identify potential operational problems in the investigation process. But don’t stop at an organization-wide average. Break the metric down by the teams or departments responsible for investigations. If cases assigned to one area consistently remain open substantially longer than comparable cases elsewhere, that might invite consideration as to why.
Perhaps one team lacks resources. Or maybe the types of cases that team handles are unusually complex. Or, it could be that the investigation process needs improvement in general.
The metric doesn’t answer those questions by itself, but it can tell you where to start looking.
The same approach applies to substantiation. Instead of assuming a particularly high or low result is inherently positive or negative, examine the surrounding circumstances. Look at the types of reports received, how employees are educated about reporting, how cases are investigated and whether results vary significantly among investigators, departments or locations.
Hotline analytics should help you evaluate both sides of the reporting process: what employees are telling you and what the organization does in response.
Step 5: Investigate anomalies instead of explaining them away
Effective hotline analysis requires curiosity. When a number looks unusual, resist the temptation to immediately construct a reassuring explanation for it.
A location with almost no reports might simply have few problems. But it might also have low awareness of reporting channels, a lack of trust in the process or concerns about retaliation. Conversely, unusually high reporting could indicate significant compliance issues – or a workforce that knows about and trusts its reporting mechanisms.
The same principle applies across your metrics. If anonymous reporting suddenly increases, ask why. If a particular allegation category spikes, examine what changed. If one location’s substantiation rate differs significantly from comparable locations, investigate the underlying cases and processes. If closure times begin increasing, determine whether the change is concentrated among certain case types or investigating teams.
Anomalies should be thought of as prompts for further investigation rather than a reached conclusion. Sometimes the explanation will be mundane, but sometimes it won’t be. Either result is more useful than assuming the number speaks for itself.
Step 6: Add external benchmarks – carefully
Once you understand your internal patterns, external benchmarking provides another layer of context.
Comparisons with similar organizations can help determine whether something that appears unusual internally may actually be common within an industry or broader business environment. But benchmarking shouldn’t become a competition and median benchmarks are not meant to be a goal.
Being above or below an external median doesn’t automatically mean your program is performing better or worse. Differences in workforce composition, geography, risk exposure, reporting channels and organizational culture can all influence results. Benchmarks matter, context matters more.
Instead, use external data as a trigger for better questions. If your reporting rate differs substantially from an appropriate benchmark, what might explain the difference? If employees use anonymous reporting differently than peers, is there something about your culture or reporting process worth exploring? If a certain issue category is unusually prevalent, does that reflect your particular risk environment?
The purpose of benchmarking isn’t to make every organization look the same. It’s to identify differences that deserve an explanation.
10 Essentials for Effective Workplace Investigations Checklist
Build more consistent, fair and defensible workplace investigations with 10 practical essentials you can use before, during and after every case.


Step 7: turn your analysis into questions – and questions into action
A useful hotline dashboard shouldn’t be the end product of your analysis. It should be the beginning of a conversation. Once trends, deviations and anomalies emerge, translate them into questions the organization can investigate and act upon.
Do employees understand when and how to report concerns? Are there locations where additional communication about reporting channels is needed? Does a particular risk require additional training? Are investigations being conducted consistently and thoroughly? Do certain teams need additional resources? Are employees confident that they can report without experiencing retaliation?
These are the types of questions that transform reporting metrics into compliance management.
Good analysis and benchmarking should lead organizations to ask whether they need more training, better employee communication, additional surveys or focus groups, stronger investigations or improvements to a culture that supports people who raise concerns. Once you’ve identified a plausible explanation for a trend, determine what action could test or address it. Then continue tracking the relevant metrics to see what happens.
That creates a cycle: measure, compare, investigate, act, measure again.
Over time, hotline analytics become more than a reporting exercise. They become a way to continually evaluate and improve the compliance program.
Make hotline data part of your early-warning system
Employees see risks that centralized compliance teams cannot always see. Every report therefore provides a potential piece of intelligence about what is happening across the organization. Viewed individually, those reports help organizations address specific concerns. Viewed collectively and over time, they can reveal patterns that would otherwise be difficult to detect.
The key is resisting the urge to reduce the program to a handful of “good” or “bad” numbers.
Build reliable data. Establish internal norms. Examine differences across the organization. Track investigation performance. Compare results with relevant external benchmarks. And most importantly, investigate what the numbers might be telling you and use those findings to determine where action is warranted.
That is how hotline data moves from a collection of reports and dashboard metrics to something much more valuable: an early-warning system for organizational risk and a tool for continuously improving your compliance program. Carefully tracked and reviewed hotline data can provide early warning signs that help organizations detect, prevent and resolve problems before they become more damaging and costly.
Turn reporting data into actionable risk intelligence
Learn how NAVEX Whistleblowing & Incident Management can help you capture, manage and analyze reports across your organization.


